HOW TO CHANGE TIRES
1. FIND A SAFE LOCATION
Make sure car park at a flat ground
2. TURN ON YOUR HAZARD LIGHTS
Your hazard lights or “flashers” will help other drivers see you on the side of the road. To avoid an accident, turn them on as soon as you realize you need to pull over.
3. PLACE YOUR VEHICLE WARNING TRIANGLE
2-3m from the vehicle and secure the tire from rolling
4. GET TOOLS FROM THE VEHICLE
There are tools like a jack lug, fully inflated spared tire
Make sure the inflated spared tire is usable
5. BEFORE WE RISE UP THE VEHICLE
Loosen the wheel lug nuts with the wrench
Rise up the vehicle with the jack at the pinch point
which is at the behind front tire, in front-rear tire
rise up the vehicle until the flat tire rise up above 6 inches
take out the lug nuts by hand
6. REMOVE THE FLAT TIRE
After removing the flat tire, install the inflated spare tire screw back the lug nuts with bare hand with a bit of force with the help of the wrench
7. PUT DOWN THE JACK
Put down the jack
tighten the screw with the wrench with your full force
Clear all the tools back to the car